NEC Univerge sv8500 Manual page 426

5. Setting Default Gateway:
MC(SIP)> SET DEFAULTROUTE P1
Default Gateway setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
6. Setting DHCP:
MC(SIP)> SET DHCP P1
DHCP setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
7. Setting DNS Server:
MC(SIP)> SET DNS_SW
DNS Interface (ENABLE/DISABLE) [ENABLE]: ENABLE
DNS IP Address [0.0.0.0]: 10.41.2.101
DNS setting succeeded.
The value in [ ] shows the current setting. Press enter key to apply the current setting shown in [ ].
Note:
When DISABLE is selected, the setting line of DNS IP Address is not displayed.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
VOL.2-173
P1: Enter the IP address of Default Gateway
(e.g. 10.41.1.254)
Result is shown.
P1: Enter ENABLE or DISABLE
ENABLE=DHCP is valid (default)
DISABLE=DHCP is invalid
Result is shown.
ENABLE=DNS server is used
DISABLE=DNS server is not used (default)
Enter the IP address of DNS server
(e.g. 10.41.2.101)
Result is shown.