NEC Univerge sv8500 Manual page 546

[When configuration data is changed]
MC-MG> EXIT
Configuration data was changed.
**Don't power off in progress**
y: Saves and Exit.
n: Exit without saving.
c: Cancel
[y/n/c]: y
Configuration data has been saved.
->
The screen returns to the prompt of the maintenance command (MC-MG, in default) if any error occurs
Note:
when "Y" is selected after changing the configuration data.
VOL.2-293
MC & MG with PFT
Line 1:
Line 2: When SAVE command is not ex-
ecuted after changing configura-
tion data
Line 3:
Line 4:
Line 5:
Line 6:
Line 7: Select Y to make the changed
configuration data effective and
exit the maintenance command
Line 8: Result is shown
Line 9: Back to the OS prompt