NEC Univerge sv8500 Manual page 539

10. To show default receiver PAD value:
MC-MG> SHOW PAD
Default Receiver PAD is 3.
11. To show Pre-Ringing:
MC-MG> SHOW PRERINGING
Pre-Ringing is ON.
12. To show frequency of Ringer:
MC-MG> SHOW RINGFREQ
Frequency of Ringer is 20Hz.
13. To show default sender PAD value:
MC-MG> SHOW SENDPAD
Default Sender PAD is 0.
The Sender PAD is inserted in the direction of the analog terminal to the IP.
Note:
The current receiver PAD value (LAN → terminal direction)
setting is shown
The current setting is shown
The current setting is shown
The current sender PAD value (terminal → LAN direction)
setting is shown
VOL.2-286
MC & MG with PFT