NEC Univerge sv8500 Manual page 781

AC power cable connection
STEP 1
Connect AC power cable to AC Power Inlet on the rear panel of MG-COT. Fix the AC power cable
with the stopper.]
Connect the other end of the power cable to appropriate AC supply.
For the safety measures against static electricity, lightning struck, and other electrical surges, be sure to
Note:
take proper connection to grounding (less than 10
struck by lightning directly, the lightning might cause damage to MG-COT and AC power cable without
Ground connection.
REAR
PACT
AC power cable stopper
MG-COT Card [SCA-6COTA/SCA-6COTC]
connected to AC Power supply
Ω ). As MG-COT has PSTN interface, if the line cable is
VOL.2-528