NEC Univerge sv8500 Manual page 778

9.2 Installation
This section shows how to install the hardware required for using MG-COT. Be sure to
take measures to anti-static electricity.
9.2.1 How to Set MG-COT
The figure below, where MG-COT Card is accommodated in the left slot of 1U-MPC,.is just an example.
Note:
100M LINK
ON
LINE
PWR ALM
Ether
Insert MG-COT Card to 1U-MPC.
STEP 1
Secure the MG-COT Card to 1U-MPC fixing two screws on right and left sides.
STEP 2
1U-MPC (Multi Purposes Chassis)
MG0 MG2 MG4 PFT
MG1 MG3 MG5
MG0 MG2 MG4
CONSOLE
MG1 MG3 MG5
RESET
OPERATION
MG-COT Card (SCA-6COTA)
MG-COT Card [SCA-6COTA/SCA-6COTC]
MUSIC
MG6
bracket to mount on 19-inch rack
Phillips screwdriver
VOL.2-525
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required