NEC Univerge sv8500 Manual page 599

7.3.3 Power On
STEP 1: Turn ON the power switch (UP) on the rear panel of MCMG.
MCMG Card (REAR)
When the 1U-MPC has already turned on, press "RESET" button on the front panel of MCMG Card to
Note:
restart the card and start its boot program.
STEP 2: Make sure the LEDs indicate normal status.
- PWR LED lights green.
- (Boot program automatically starts.)
- ON LINE LED light green when the sequence is completed.
Turn ON the
power switch (UP)
PACT
MCMG Card/Box (FRONT)
ON
OPERATION
100M LINK LINE
MG MG0 MC0 MC2
PWR ALM
MG0 MG1 MC0 MC1 MC2 MC3
Ether
MC MG1 MC1 MC3
ON LINE lamp
PWR lamp
VOL.2-346
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
MCMG Box (REAR)
CONSOLE
PFTRD
RESET
MUSIC
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Turn ON the
power switch (UP)