NEC Univerge sv8500 Manual page 1259

13.4.11 Error Messages
When an error occurs in using the maintenance command, error message is indicated to show the cause for help-
ing the reassignment of required data.
MESSAGE
File not found on the TFTP server.
Command not found.
Invalid parameter.
IP address form is incorrect.
VLAN ID is no more registered.
Sub command is missing.
Invalid parameter value.
Invalid sub command.
No response from CPU (TC).
Command is abnormally terminated.
Parameter(s) are missing.
Entered VLAN ID is already registered.
Entered VLAN ID is not registered.
List of Error Messages
System data cannot be found and downloaded in the TFTP Server.
An entered command is not supported.
Invalid parameters are entered with a command.
An entered IP address is incorrect in the input format.
Registered VLAN IDs exceeded a maximum.
Sub command is necessary when the command is entered.
The parameter is out of range.
The sub command is incorrect.
There is no response from other CPUs.
The command failed to complete.
Parameter(s) are necessary when the command is entered.
Specified VLAN ID is duplicated.
Specified VLAN ID is invalid.
VOL.2-1006
MG-PRI/PRA
CAUSE