NEC Univerge sv8500 Manual page 406

The following files have to be located in the root folder.
Note:
Contents of Firmware
SP3893-xxx
EXAMPLE:
SP3893-002
Issue Number (ISSUE2)
Firmware Number
Permit read behavior of this directory. For more information, refer to the appropriate manual
STEP 4
attached to the TFTP server program.
Set network environment for the TFTP server.
STEP 5
IP Address: 10.41.1.250
Subnet mask: 255.255.255.0
Start the TFTP program.
STEP 6
Power on 8LC Card.
STEP 7
Activate HyperTerminal and set the following:
STEP 8
Bit per second: 9600bps
Data bits: 8bit
Parity: None
Stop bit: 1bit
Flow control: None
Enter "usrConsole" following the OS prompt (->).
STEP 9
When the 8MC Card's prompt ("8MC(SIP)>") is displayed, enter "download".
STEP 10
When the message "Do you need download?" is displayed, enter "y".
STEP 11
The current setting of 8LC Card is displayed, and then the screen asks you to input TFTP
STEP 12
server IP address. Enter the IP address of TFTP server.
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
SP3893
Locate the files
in the root directory,
shown as on the right.
8amcmwlist.txt
root directory of TFTP server
SP3893
VOL.2-153
main-dat.txt
mc8-dsp.bin
mc8-dspcksum.txt
mc8-dspk.bin
mc8-dspkcksum.txt
mc8-main.bin
mc8-maincksum.txt
mc8-sysdata.txt
mc8-sysdatacksum.txt
mcmg-tone.bin
mcmg-tonecksum.txt
music-dat.txt
tone-dat.txt