NEC Univerge sv8500 Manual page 796

AMGVL: Assignment of Media Gateway Voice Control (LDM)
Assign the voice control data for terminal that is connected to MG (6COT). When AMGVL data is not as-
signed, AIVCL data setting is applied.
A RT (MG Storing)
TYPE
B RT (MG Storing)
B LOC-ID:Location ID of IP terminal connected to MG (6COT)
Setting of Jitter Buffer
Setting Type of Voice Packet Service
Setting of Payload
Setting of PAD
PAD Information
The PAD value of MG (6COT) is valid only when you select "Setting"from the drop-down box of "Setting
Note:
of Detail" to specify the detail PAD value.
AIVCL: Assignment of IP Service Voice Control Data (LDM)
Assign the voice packet control data for terminal that is connected to MG (6COT).
A LOC-ID
B LOC-ID
SETTING OF JITTER BUFFER
SETTING OF TYPE OF SERVICE (VOICE PACKET)
SETTING OF PAYLOAD
Physical Route Number for Virtual Speech Channel of MG (6COT)
Select one of the followings:
• Route Specified
• Location ID Specified
Displayed when TYPE=Route Specified is selected.
Physical Route Number for Virtual Speech Channel of terminal connected to MG
Displayed when TYPE=Location ID Specified is selected.
JB_MIN:Jitter Buffer Minimum
JB_MAX:Jitter Buffer Maximum
Type of service for MG (6COT)
TYPE
SIZE
Click this check box when setting data for PAD value of MG.
This parameter is available only when the check box of "Setting of PAD" is ON.
No = 1: The PAD value of MG when DtermIP/Soft Phone/INASET is connected
No = 2: The PAD value of MG when Analog MC/Digital MC is connected
No = 3: The PAD value of MG when IPPAD is connected
No = 4: The PAD value of MG when MG is connected
Location ID of MG (6COT) or IP terminal
Location ID of MG (6COT) or IP terminal
JB_MIN:Jitter Buffer Minimum
JB_MAX:Jitter Buffer Maximum
Type of service for MG (6COT)
PAYLOAD TYPE
PAYLOAD SIZE
MG-COT Card [SCA-6COTA/SCA-6COTC]
VOL.2-543