NEC Univerge sv8500 Manual page 753

Follow the display below when you want to change the data entered in the former steps.
Note 3:
<e.g. When DHCP server is not used>
OWN IPADDRESS (XXX.XXX.XXX.XXX):1.1.1.10
SUBNET MASK (XXX.XXX.XXX.XXX):255.255.255.0
DEFAULT ROUTE (XXX.XXX.XXX.XXX):b
SUBNET MASK (XXX.XXX.XXX.XXX):
CLEAR COMMAND
To clear all the assigned configuration data.
MC-MG> CLEAR CONFIG
[SYSTEM]
LONG_TIMEOUT=30
SHORT_TIMEOUT=5
:
:
Configuration data initial setting succeeded.
Reboot.....
IP address is entered.
Subnet mask is entered.
Enter "b" to change the Subnet mask setting.
Returns to Subnet mask setting line.
VOL.2-500
MCMG Card [SCA-7COTA]