NEC Univerge sv8500 Manual page 704

MG-ID = 00:30:13:16:ae:fa
Use DHCP?
Input [Y(Yes)/N(No)/Q(Quit)]:y
Use DHCP option? (Get DRS address)
Input [Y(Yes)/N(No)/Q(Quit)]:n
DRS1 ADDRESS (XXX.XXX.XXX.XXX):192.168.0.10
------------------------------------------
MG-ID = 00:30:13:16:ae:fa
DHCP = ENABLE
DRS1 ADDRESS = 192.168.0.10
------------------------------------------
Input [Y(OK)/N(Change)/Q(Quit)]:y
Write down the displayed MG-ID (MAC address of MCMG) to assign the MAC address on PCPro com-
Note:
mand AMGIL and AISTL.
MCMG's MAC address is displayed.
Set whether to use DHCP server.
Input "y" here and press Enter key.
Set whether to use DHCP option. This option is the
function to get DRS address from DHCP server.
Input "n" here and press Enter key.
Assign the IP address of DRS.
Confirm the assigned data. Input "y" and press Enter
key. The assigned data is automatically saved and start
rebooting. The data turns effective after rebooting the
MCMG.
VOL.2-451
MCMG Card [SCA-7COTA]