NEC Univerge sv8500 Manual page 1035

11. SHOW SIGNALING_QOS: Displays the setting status for current Signaling Session.
Displays the setting status for current Signaling Session.
MG-BRI>show signaling_qos
DRS QOS is 0xC0 (QOS=IP PRECEDENCE)
PRECEDENCE =6
DELAY =0
THROUGHPUT =0
RELIABILITY =0
COST =0
12. SHOW SMOOTH_PAD: Displays the current Smooth PAD mode.
Displays the current Smooth PAD mode.
MG-BRI>show smooth_pad
Smooth PAD mode is OFF.
13. SHOW PRE-NEGOTIATION_PORT_NO: Displays the current setting for Port number to be used for
sending/receiving H.245 Pre-negotiation Packet.
Displays the current setting for Port number to be used for sending/receiving H.245 Pre-negotiation Packet.
MG-BRI>show pre-negotiation_port_no
H.245 pre-negotiation port number is 10001.
14. SHOW RTP_START_PORT_NO: Displays the RTP start port number currently assigned.
Displays the RTP start port number currently assigned.
MG-BRI>show rtp_start_port_no
RTP start port number is 1024.
15. SHOW VLAN: Displays the current VLAN setting status.
Displays the current VLAN setting status.
MB-BRI>show vlan
DEVICE ID COS
VLAN1 1 6
This example is assigned with IP Precedence.
IPADDRESS SUBNETMASK
10.41.1.200 255.255.255.0
VOL.2-782
MG-BRI