NEC Univerge sv8500 Manual page 1073

12.3.3 Power On
STEP 1: Turn ON the power switch (UP) on the rear panel.
MG-SIP16 Card (REAR)
When the 1U-MPC has already turned on, press "RESET" button on the front panel of MG(BRI) Card to
Note:
restart the card and start its boot program.
STEP 2: Make sure the LEDs indicate normal status.
- PWR LED lights green.
- (Boot program automatically starts.)
- ON LINE lamp lights green when the sequence is completed.
Turn ON the
power switch (UP)
PACT
MG(BRI) Card/Box (FRONT)
100M LINK EMA TEL CONSOLE
B D B D
ON
PWR ALM LINE
Ether LINE0 LINE1
ON LINE lamp
PWR lamp
VOL.2-820
MG(BRI) [SCA-2BRIA/MG-2BRIA]
MG-SIP16 Box (REAR)
MUSIC
RESET
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Turn ON the
power switch (UP)