NEC Univerge sv8500 Manual page 1299

14.3.3 Power On
STEP 1: Turn ON the power switch (UP) on the rear side of MG(PRI).
MG(PRI) Card (REAR)
When the 1U-MPC has already turned on, press "RESET" button on the front panel of MG(PRI) Card to
Note:
restart the card and start its boot program.
STEP 2: Make sure the LED indicates normal status.
- PWR LED lights green.
- (Boot program automatically starts.)
Turn ON the
power switch (UP)
PACT
MG(PRI) Card/Box (FRONT)
100M LINK B D CONSOLE
ON
PWR ALM
LINE LB
Ether LINE
PWR lamp
VOL.2-1046
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
MG(PRI) Box (REAR)
MUSIC
RESET
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Turn ON the
power switch (UP)