NEC Univerge sv8500 Manual page 623

3. Setting DSP echo canceller for FAX communication
MC-MG > SET DSP_ECFB 0
DSP ECFB Mode setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
4. Setting Training feature mode of echo canceller:
MC-MG > SET EC_TRAINING ON
EC Training setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
5. Setting FAX enable timer:
MC-MG> SET FAXERRORDETECT 0
FAX Enable Timer setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
Line 1: Enter 0 or 1
0=FAX echo canceller is ON (default)
1=FAX echo canceller is OFF
Line 2: Result is shown
Line 1: Select the Training feature mode of EC
ON=Training function is valid
OFF=Training function is invalid (default)
Line 2: Result is shown
Line 1: Enter the Change Effective Timer
0=Invalid to change to Fax mode
1-5=Possible to change to Fax mode within 1-5
minutes (default=1 minute)
OFF=Always possible to change to Fax mode
Line 2: Result is shown
VOL.2-370