9.3.4
Configuration Command Assignment
Assign the configuration data by command operation on maintenance console.
This section consists of two parts; procedure for Proprietary Protocol mode and procedure for SIP mode. The
following explains the procedure by each mode.
"DRS (Device Registration Server)" used in this section refers to the Telephony Server. When MG-COT
Note:
Card works in Proprietary Protocol mode, the Telephony Server acts as DRS, which is controlling function
of the Telephony Server.
"SIP server" used in this section refers to the Telephony Server. When MG-COT Card works in SIP mode,
Note:
the Telephony Server acts as SIP server.
The setting data here is an example. Assign the network data according to your network configuration.
Note:
MG-COT Card [SCA-6COTA/SCA-6COTC]
VOL.2-549