NEC Univerge sv8500 Manual page 1066

12.3 Startup MG(BRI) and Basic Tests
This section explains procedures for startup and basic tests. Follow the procedure below.
STEP 1: Data Assignment by PCPro
1. Internal PHE Data Assignment
2. SP-PHI Data Assignment
3. MG(BRI) Data Assignmet
4. Security Data Assignment
STEP 2: Terminal Software Setting on Maintenance Console
1. Connection between PC (maintenance console) and CONSOLE Connector
2. Terminal Software Activation
3. Setting of Terminal Software
STEP 3: Power ON
STEP 4: Configuration Command Assignment
1. Selection whether to use DHCP/DNS server
2. Network Data Assignment
STEP 5: Cable Connection
1. Connection between MG(BRI) and LAN
2. Connection between ISDN lines and MG
STEP 6: Basic Test Procedures
1. Basic Connection Test
2. Alarm Information Check
3. Emergency Telephone Switching Test
END
VOL.2-813
MG(BRI) [SCA-2BRIA/MG-2BRIA]