NEC Univerge sv8500 Manual page 1154

18. SHOW WARNING_TONE_CONTROL
Displays the current setting whether to send warning tone in the case of LAN failure.
MG-BRI>show waring_tone_control
Warning Tone Control of IP Network is 3 (IP & ISDN side).
SAVE CONFIG, EXIT, REBOOT Command
SAVE CONFIG Command
This command is used to save the modified configuration data to the FlashROM.
MG-BRI>save config
** Don't power of in progress **
Do you need save? [Y/N]: Y
Preservation of configuration data has been saved.
Re-starting is required for making a setup reflect!!
Configuration data will not be saved when any error occurs while SAVE CONFIG command is in process.
Note:
VOL.2-901
MG(BRI) [SCA-2BRIA/MG-2BRIA]
Enter "Y" to execute data saving.
Result is displayed.