NEC Univerge sv8500 Manual page 1086

STEP 7: After data assignment in Standard mode is completed normally, the assigned data is listed. Enter "Y"
and press Enter key when asked to save the data. The display returns to main menu of the configuration
mode.
STEP 8: One Time Password setting
Move on to the Custom mode.
-<Configuration mode>Main menu-
Standard
Custom
Quit
Input: 2
Set One Time Password for registration (e.g. 0123456789).
MG-BRI>set one_time_pass
One Time Password: 0123456789
Set the One Time Password in the range of 4-10 digits (numerics 0-9, * (asterisk), # (pound sign) is avail-
Note:
able).
Assigned One Time Password is deleted from the configuration setting when the first registration is com-
Note:
pleted.
STEP 9: Save the assigned configuration data.
MG-BRI>save config
** Don't power off in progress **
Do you need save? [Y/N]:Y
STEP 10:Reboot the MG(BRI) by turning the power OFF
MG-BRI>reboot
Do you need reboot? [Y/N]:Y
MG-ID (MAC Address of MG(BRI)) is displayed after rebooting. The MG-ID needs to be assigned in
Note:
AMGIL command.
--- input: 1
--- input: 2
--- [Q/q]
→
ON or pressing RESET button.
VOL.2-833
MG(BRI) [SCA-2BRIA/MG-2BRIA]