NEC Univerge sv8500 Manual page 647

PUT COMMAND
To upload Configuration Data file to specified TFTP server:
MC-MG> PUT CONFIGDATA 10.41.1.150
Configuration data has been uploaded.
Configuration data file is uploaded to the TFTP server.
Note:
REBOOT COMMAND
To reboot the MCMG:
MC-MG> REBOOT
Do you need reboot? [Y/N]: Y
The screen returns to the prompt of the maintenance command (MC-MG, in default) if any error occurs
Note:
when "Y" is selected after changing the configuration data.
EXIT COMMAND
To exit the maintenance command:
[Normal occasion (without any change to be saved)]
MC-MG> EXIT
->
When the "exit" command is executed on the OS prompt (
Note:
press the CTRL + C keys simultaneously to display the OS prompt (
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
Line 1: Specify the IP Address of TFTP Server af-
ter the Command Name.
(e.g. 10.41.1.150)
Line 2: Result is shown
Line 1:
Line 2: Enter Y or N to confirm
(i.e. Yes/No)
Line 1: Normal occasion
Line 2: Back to the OS prompt
→
), key operation turns unaccepted. In this case,
VOL.2-394
→ ) again.