NEC Univerge sv8500 Manual page 728

11. Setting Pre-Ringing:
MC-MG> SET PRERINGING ON
Pre-Ringing setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
12. Setting frequency of Ringer:
MC-MG> SET RINGFREQ 0
Frequency of Ringer setting succeeded. (frequency is 20Hz.)
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
13. Setting default sender PAD value:
MC-MG> SET SENDPAD 0
Default Sender PAD setting succeeded.
The SENDPAD command assigns the value to decrease voice level in the sender (analog terminal to IP)
Note:
direction.
The total PAD value (Sender PAD + Fax Sender PAD) is limited to 20dB.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
Line 1: Enter ON or OFF.
ON=Pre-Ringing is valid (default)
OFF=Pre-Ringing is invalid
Line 2: Result is shown.
Line 1: Enter 0 or 1 to specify the Frequency of Ringer.
0=20 Hz (default)
1=25 Hz
Line 2: Result is shown.
Line 1: Enter the PAD value in the range of -10dB ~
20dB after the command name (default=0).
Line 2: Result is shown.
VOL.2-475
MCMG Card [SCA-7COTA]