NEC Univerge sv8500 Manual page 1026

5. SET FAX_DETECTION_TIME: Assignment of effective switching time for FAX
Assign the effective switching time for FAX
MG-BRI>set fax_detection_time P1
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
6. SET HC_RCV_TIMER: Assignment of Time-out value for Telephony Server health check waiting pro-
cess.
Assign the Time-out value for Telephony Server health check waiting process.
MG-BRI>set hc_rcv_timer P1
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
7. SET INTERFACE: Specify the speed and activation mode of Ether controller.
Assign the speed and activation mode of Ether controller.
MG-BRI>set interface
SPEED(AUTO/100M/10M):10M
DUPLEX(FULL/HALF):HALF
DUPLEX setting will not be effective when "AUTO" was chosen for speed.
Note:
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
8. SET LAN_ERROR_CHECK: Assignment of interval to detect LAN cable fall-off.
Assign the interval to detect LAN cable fall-off
MG-BRI>set lan_error_check P1
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
P1: Assignment of effective time
0: No switching to FAX
1-5: Switching time effective (minute)
(Default: 1 minute)
6-9: Switching always effective
P1: Specify Time (Second) (30 second interval)
Effective range: 120-300 (Default: 150)
AUTO: AUTO Negotiation (Default)
100M: 100Mbps Fixed mode
10M: 10Mbps Fixed mode
FULL: Full-duplex mode
HALF: Half-duplex mode
P1: Specify Time (milli-second)
(10 milli-second interval)
Effective range: 100-1000 (Default: 1000)
VOL.2-773
MG-BRI