NEC Univerge sv8500 Manual page 1256

13.4.7 GET Command
1. GET Δ CONFIGDATA
This command is used to download configuration data from TFTP server.
MG-PRI > GET CONFIGDATA 111.222.33.4
The download of configuration data for NC was
successful.
2. GET Δ TCS_CONFIGDATA
This command is used to download configuration data for TC from TFTP server.
MG-PRI > PUT TCS_CONFIGDATA 111.222.33.4
The upload of configuration data for TC was
successful.
13.4.8 PUT Command
1. PUT Δ CONFIGDATA
This command is used to upload a configuration data to specified TFTP server:
MG-PRI > PUT CONFIGDATA 111.222.33.4
The upload of configuration data for NC was
successful.
Δ
2. PUT TCS_CONFIGDATA
This command is used to upload a configuration data for Trunk to specified TFTP server:
MG-PRI > PUT TCS_CONFIGDATA 111.222.33.4
The upload of configuration data for TC was
successful.
Δ P1
Δ P1
Δ P1
Δ
P1
VOL.2-1003
P1-Specify the IP address of TFTP server after
the command name.
A command is executed, and the result is displayed.
P1-Specify the IP address of TFTP server after
the command name
A command is executed, and the result is displayed.
P1-Specify the IP address of TFTP server
A command is executed, and the result is displayed.
P1-Specify the IP address of TFTP server
A command is executed, and the result is displayed.
MG-PRI/PRA