NEC Univerge sv8500 Manual page 810

• When DHCP server is used
In this setting, because MG-COT Card automatically gets IP address from DHCP server, it is not required
to set IP address and Default Gateway on MG-COT Card. Set the Ethernet Speed as follows.
Ethernet Speed:
--- Ethernet Speed set ---
Current LAN Speed : AUTO
Change LAN Speed ? [Y(change)/N(current)/Q(quit)] : Y
Input new Speed [1(AUTO)/2(100M)/3(10M)] : 2
Input new DUPLEX [F(full)/H(half)] : F
MG-COT Card [SCA-6COTA/SCA-6COTC]
VOL.2-557