NEC Univerge sv8500 Manual page 1329

<Data Assignment on FTP Server>
Put the firmware files (For example, SP3884) and mpgrimwlist.txt for upgrade in the root fold-
STEP 1
er of FTP server.
Contents of Firmware
SP3884-005 SP3884
mgprimwlist.txt
EXAMPLE:
SP3884-005
Issue Number (ISSUE5)
Firmware Number
Set read permission for this directory. For more information, refer to the appropriate manual
STEP 2
attached to the FTP server program.
<Data Assignment on PCPro>
Activate the ATDL command, and then specify the following:
STEP 3
- Select an item of External Server in FTP Server Setup.
- Input the IP address of FTP server.
- Input Login Name and Password for logging in to FTP server if required.
- Select an item of Parallel in Download Method.
- Confirm "PRI2.0 MG" is displayed in Firmware File Name. If it is not in the list, create an
item by clicking the Insert button. Set the following attributes, and then click the OK button.
After completing the above, click the Insert button located in Terminal Information.
Select Specify Terminal Type in How to Specify Terminal, and then select PRI2.0 MG.
STEP 4
Click the Search button.
STEP 5
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
Locate the files
in the root directory,
shown as on the right.
VOL.2-1076
root directory of TFTP server
SP3884
mgprimwlist.txt