NEC Univerge sv8500 Manual page 417

Setting DNS server enable/disable:
--- DNS Interface set ---
Current DNS Interface: DISABLE
Change DNS Interface? [Y(change)/N(current)/Q(quit)]: Y
Input new DNS Interface [E(enable)/D(disable)]: E
Line 2: The current setting is displayed.
Line 3: Asked whether to change the displayed setting.
Y=change
N=not change
Q=quit this setting
Line 4: Specify whether to use DNS server.
E=Use DNS server (default)
D=Not use DNS server
Setting DNS server IP Address:
--- DNS IP Address set ---
Current DNS IP Address: 0.0.0.0
Change DNS IP Address? [Y(change)/N(current)/Q(quit)]: Y
Input new DNS IP Address: 10.41.1.150
Line 2: The current setting is displayed.
Line 3: Asked whether to change the displayed setting.
Y=change
N=not change
Q=quit this setting
Line 4: Enter new IP address of DNS server (e.g. 10.41.1.150)
This setting is required when DHCP server is "D (disable)" and DNS server is "E (enable)".
Note:
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
VOL.2-164