NEC Univerge sv8500 Manual page 772

4. Port Number
The following provides the port number to be used in this system.
• When using Proprietary Protocol Mode
Port Number
3456/UDP
(Telephony Server LAN1)
/UDP
3457
50001/UDP
1024~ /TCP
1024~64510/UDP
When using SIP Mode
Function
Registration
TP ⇔ SP
Note 1
iLP-PM
SP Internal
Control Port
iLP-PM
Note 2
MG-COT
SIP
⇔ SP
Ready
H.245
Negotiation
H.245
The packet between TP and SP ("TP ⇔ SP" in the table) does not flow over the network because both of
Note 1:
which are part of the Telephony Server.
The packet related to SP internal control port does not flow over the network.
Note 2:
Path
DRS
MG-COT
MG-COT
Peer to Peer
Peer to Peer
TP side
LAN Port Port Number
(default) (default)
LAN1 3456
LAN1 60130
- -
- -
- -
- -
VOL.2-519
MG-COT Card [SCA-6COTA/SCA-6COTC]
Function
Changing an initial value by using
Registration
ADTM command.
Registration
iLP-PM
H.245 Allocated by Operating System
Changing an initial value by using
the configuration command. [SET
RTP
STARTPORT] from a local con-
sole.
Command to Port Number
Change Setting
ADTM
(Port Number only)
ADTM
(Port Number only)
-
-
-
- 22003 ~ 26000
Note
-
-
SP side
Command to
(default) Change Setting
22000 Cannot be changed
64105 ALIDL
64010 ALIDL
22001 ASPC
5060 Cannot be changed
22002 ASPC
ASPC