Antenna Unit - Keysight x-series User Reference Manual

Antenna Unit

When a Correction is turned on that uses an Antenna Unit, the Y Axis Unit changes to that Antenna Unit. All
of the keys in the Y-Axis Unit menu are then greyed out, except the Antenna Unit key. The unit being used is
shown on this key and is shown as selected in the submenu.
Key Path
Dependencies
Readback line
Initial S/W Revision
dBµV/m
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBµV/m. This is an antenna unit, and
this key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of the
other Antenna Units are grayed out.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
dBµA/m
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBµA/m. This is an antenna unit, and
this key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of the
other Antenna Units are grayed out.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
dBµA
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBµA. This is an antenna unit, and this
key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of the
other Antenna Units are grayed out.
Key Path
EMI Receiver Mode Reference
AMPTD Y Scale, Y Axis Unit
Grayed out if no Amplitude Correction with an Antenna Unit is on.
Currently selected unit
A.11.00
AMPTD Y Scale, Y Axis Unit, Antenna Unit
UNIT:POW DBUVM
Grayed out if no Amplitude Correction with an Antenna Unit is on.
dBµV/m
A.02.00
AMPTD Y Scale, Y Axis Unit, Antenna Unit
UNIT:POW DBUAM
Grayed out if no Amplitude Correction with an Antenna Unit is on.
dBµA/m
A.02.00
AMPTD Y Scale, Y Axis Unit, Antenna Unit
9 Strip Chart Measurement
AMPTD Y Scale
617