Sicl Server - Keysight x-series User Reference Manual

SICL Server

Turns the SICL server capability On or Off, enabling you to limit SCPI access over LAN through the SICL
server. (SICL IEEE 488.2 protocol.)
Parameter
Maximum Connections
Instrument Name
Instrument Logical Unit
Emulated GPIB Name
Emulated GPIB Logical Unit
Emulated GPIB Address
Key Path
Mode
Remote Command
Example
Preset
State Saved
Range
Initial S/W Revision
HiSLIP Server
Turns the HiSLIP server capability On or Off, enabling you to limit SCPI access over LAN through the HiSLIP
server.
HiSLIP stands for High Speed LAN Instrument Protocol and is part of the IVI–6.1 specification.
Here is an example of a VISA connection string used to connect to the HiSLIP Server on an X-Series
Spectrum Analyzer:
TCPIP0::a-n9030a–93016::hislip0::INSTR
In the example above, hislip0 is the HiSLIP device name that VISA users must include in their HiSLIP VISA
Address strings. Your HiSLIP device name may be different depending on your VISA settings.
Key Path
EMI Receiver Mode Reference
Description
The maximum number of connections that can be accessed
simultaneously
The name (same as the remote SICL address) of your analyzer
The unique integer assigned to your analyzer when using SICL
LAN
The name (same as the remote SICL address) of the device used
when communicating with your analyzer
The unique integer assigned to your device when it is being
controlled using SICL LAN
The emulated GPIB address assigned to your transmitter tester
when it is a SICL server (the same as your GPIB address)
System, I/O Config, SCPI LAN
All
:SYSTem:COMMunicate:LAN:SCPI:SICL:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:SICL:ENABle?
:SYST:COMM:LAN:SCPI:SICL:ENAB OFF
This is unaffected by Preset, but is set to ON with a "Restore System Defaults->Misc"
No
On | Off
Prior to A.02.00
System, I/O Config, SCPI LAN
6 System Functions
System
Setting
5
inst0
8
gpib7
8
18
335