Start Analysis - Keysight x-series User Reference Manual

12 Disturbance Analyzer Measurement
Sweep Control
Key Path
Remote Command
Example
Initial S/W Revision

Start Analysis

Executes the disturbance analysis process and the measurement results will be shown after completion.
Key Path
Remote Command
Example
Dependencies
Initial S/W Revision
1122
Sweep/ Control
:INITiate:IMMediate
:INITiate:RESTart
INIT:IMM
INIT:REST
A.14.00
Sweep/ Control
:INITiate:DANalyzer:SANalysis
INIT:DAN:SAN
This key is grayed out when a measurement is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.12.00
EMI Receiver Mode Reference