Backlight - Keysight x-series User Reference Manual

Flat Monochrome
Selects a format that is like Flat Color. But only black is used (no colors, not even gray), and no fill.
Key Path
Example
Readback
Initial S/W Revision

Backlight

Accesses the display backlight on/off keys. This setting may interact with settings under the Windows
"Power" menu.
When the backlight is off, pressing ESC, TAB, SPACE, ENTER, UP, DOWN, LEFT, RIGHT, DEL, BKSP, CTRL,
or ALT turns the backlight on without affecting the application. Pressing any other key will turn backlight on
and could potentially perform the action as well.
Key Path
Remote Command
Preset
Initial S/W Revision
Backlight Intensity
An active function used to set the backlight intensity. It goes from 0 to 100 where 100 is full on and 0 is off.
This value is independent of the values set under the Backlight on/off key.
Key Path
Remote Command
Example
Preset
Min
Max
Initial S/W Revision
Meters Display
Enables you to turn on/off the meters display. When ON and no scan or final measurement is running, the
meters will take up the right side of the display. When OFF, the frequency scan expands to fill the entire
EMI Receiver Mode Reference
Save, Screen Image, Themes
MMEM:STOR:SCR:THEM FMON
Flat Mono
Prior to A.02.00
View/Display, Display, System Display Settings
:DISPlay:BACKlight ON|OFF
:DISPlay:BACKlight?
ON (Set by Restore Misc Defaults)
Prior to A.02.00
View/Display, Display, System Display Settings
:DISPlay:BACKlight:INTensity <integer>
:DISPlay:BACKlight:INTensity?
DISP:BACK:INT 50
100 (Set by Restore Misc Defaults)
0
100
Prior to A.02.00
8 Frequency Scan Measurement
View/ Display
603