Restore Defaults - Keysight x-series User Reference Manual

5 Mode Functions
Mode Setup
This function is reset to Off when the Restore Defaults key is pressed in the Global Settings menu, or when
System, Restore Defaults, All Modes is pressed.
Key Path
Scope
Remote Command
Example
Preset
Range
Initial S/W Revision

Restore Defaults

This key resets all of the functions in the Global Settings menu to off. See
245for more details.
Key Path
Initial S/W Revision
LISN Control
This menu enables you to access LISN related functions. LISN control is only available in the MXE with
option LSN indicating that the LISN IO board is installed. Otherwise, the key will not be shown.
Key Path
Initial S/W Revision
V-network
Enables you to select the V-network that is controlled via the AUX IO port.
Key Path
Remote Command
Example
Notes
260
Mode Setup, Global Settings
Mode Global
:INSTrument:COUPle:EMC:STANdard ALL|NONE
:INSTrument:COUPle:EMC:STANdard?
INST:COUP:EMC:STAN ALL
INST:COUP:EMC:STAN?
Set to Off on Global Settings, Restore Defaults and System, Restore Defaults, All Modes
On|Off
A.07.00
Mode Setup, Global Settings
A.07.00
Mode Setup
A.13.50
Mode Setup, LISN Control
INPut[1]|2:LISN[:TYPE] FOURphase|ESH2Z5| ENV216 | OFF
INPut[1]|2:LISN[:TYPE]?
:INP:LISN FOUR
FOURPhase and ESH2-Z5
R&S ESH2-Z5 (four phases and protective earth are controllable)
ENV216
R&S ENV216 (two phases and highpass are controllable)
"Restore Defaults" on page
EMI Receiver Mode Reference