Amptd Y Scale - Keysight x-series User Reference Manual

9 Strip Chart Measurement
AMPTD Y Scale
AMPTD Y Scale
Displays the menu keys that enable you to control the amplitude parameters.
Key Path
Notes
Initial S/W Revision
Reference Level
Specifies the amplitude represented by the topmost graticule line.
Key Path
Remote Command
Example
Preset
State Saved
Min
Max
Default Unit
Initial S/W Revision
Attenuation
Sets the value of Attenuation. Only the mechanical attenuator is available. For details about this key, see
"Attenuation" on page 896
Presel Center
For details about this key, see
Presel Adjust
For details about this key, see
Y Axis Unit
Display the menu keys that enable you to change the vertical (Y) axis amplitude unit. .For details about this
key, see Y Axis Unit@32002
608
Front-panel key
Front panel only.
A.07.00
AMPTD Y Scale
:DISPlay:SCHart:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:RLEVel <real>
:DISPlay:SCHart:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:RLEVel?
DISP:SCH:VIEW:WIND:TRAC:Y:RLEV 80 dBuV
DISP:SCH:VIEW:WIND:TRAC:Y:RLEV?
106.99 dBuV
Saved in instrument state.
RefLevelMin = –63.01dBuV + RefLevelOffset - ExtGain.
RefLevelMax = 206.99 dBuV + RefLevelOffset - ExtGain
Depends on the current selected Y-axis unit
A.07.00
.
"Presel Center" on page 897
"Preselector Adjust" on page 899
EMI Receiver Mode Reference