Trace/Detector - Keysight x-series User Reference Manual

Trace/Detector

Displays a menu of keys that enable you to control the trace setting for the APD trace window.
Key Path
Notes
Initial S/W Revision
Select Trace
Determines which trace the type control keys will affect. When you select a trace, it makes that trace the
current trace, so it displays on top of all of the other traces.
Key Path
Notes
Preset
State Saved
Initial S/W Revision
View/Blank
This key lets you set the state of the two trace variables, Update and Display. The four choices available in
this 1-of-N menu are:
• Trace On: Update and Display both On
• View: Update Off and Display On
• Blank: Update Off and Display Off
• Background: Update On, Display Off (this allows a trace to be blanked and continue to update "in the
background")
Key Path
Notes
Couplings
EMI Receiver Mode Reference
Front-panel key
Front panel only.
A.13.00
Trace/ Detector
Front panel only.
Measured
Saved in instrument state.
A.13.00
Trace/Detector
The four states of this 1-of-N actually set two variables, Update and Display, to their four possible
combinations:
Trace On: Update and Display both On
View: Update Off and Display On
Blank: Update Off and Display Off
Background: Update On, Display Off
See the following tables, "Trace Update State (Remote Command Only)" on page 1010
Display State (Remote Command Only)" on page
variables.
Loading a trace from a file puts that trace in View regardless of the state it was in when it was saved.
1010, for details on the SCPI to control these two
11 APD Measurement
Trace/Detector
and "Trace
1009