Auto Sort - Keysight x-series User Reference Manual

Auto Sort

If this is turned On, the disturbance list is sorted based on the sorting order and sorting type as selected. If
this is Off, the disturbance will be added into the last row of the disturbance list.
Key Path
Remote Command
Example
Preset
State Saved
Range
Initial S/W Revision
Delete All
Deletes all disturbances in the disturbance list. If you accessed this function from the front panel, the
following message will prompt you for confirmation to delete the selected disturbances from the
disturbance list..
This will delete all disturbances. Are you sure you want to do this?Please press Enter or OK to proceed.
Press ESC or Cancel to close this dialog.
Key Path
Remote Command
Example
Initial S/W Revision
Comment
Sets an ASCII comment field for each disturbance in list, which will be shown in the "Comment" column of
the disturbance list. This value will be stored in the disturbance list exported file.
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
EMI Receiver Mode Reference
Meas Setup, Disturbance List, Sort Disturbances
CALCulate:DANalyzer:DLISt:SORT:AUTO ON|OFF|1|0
CALCulate:DANalyzer:DLISt:SORT:AUTO?
CALC:DAN:DLIS:SORT:AUTO 1 Turn on auto sorting
CALC:DAN:DLIS:SORT:AUTO?
ON
Saved in instrument state
On|Off
A.14.00
Meas Setup, Disturbance List
CALCulate:DANalyzer:DLISt:DELete:ALL
CALC:DAN:DLIS:DEL:ALL
A.14.00
Meas Setup, Disturbance List
CALCulate:DANalyzer:DLISt:COMMent <integer>,'string'
CALCulate:DANalyzer:DLISt:COMMent? <integer>
CALC:DAN:DLIS:COMM 1,'Is OK'
""
Saved in instrument state
A.14.00
12 Disturbance Analyzer Measurement
Meas Setup
1063