Scpi Language Compatibility - Keysight x-series User Reference Manual

5 Mode Functions
Mode

SCPI Language Compatibility

The SCPI Language Compatibility mode provides remote language compatibility for SCPI-based
instruments, such as the Rohde and Schwartz FSP and related series of spectrum analyzers.
After changing into or out of this mode, allow a 1 second delay before sending any subsequent commands.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
Spectrum Analyzer
Selects the Spectrum Analyzer mode for general purpose measurements. There are several
measurements available in this mode. General spectrum analysis measurements, in swept and zero span,
can be done using the first key in the Meas menu, labeled Swept SA. Other measurements in the Meas
Menu are designed to perform specialized measurement tasks, including power and demod
measurements.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
TD-SCDMA with HSPA/8PSK
Selects the TD-SCDMA mode for general purpose measurements of signals following this standard. There
are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
242
Mode
INST:SEL SCPILC
Or
INST:NSEL 270
A.06.00
Mode
INST:SEL SA
INST:NSEL 1
Prior to A.02.00
Mode
INST:SEL TDSCDMA
INST:NSEL 211
Prior to A.02.00
EMI Receiver Mode Reference