Trig Out - Keysight x-series User Reference Manual

4 Input/Output Functions
Input/Output

Trig Out

Select the type of output signal that will be output from the Trig 1 Out, or Trig 2 Out connectors.
Key Path
Remote Command
Example
Dependencies
Preset
State Saved
Initial S/W Revision
Polarity
Sets the output to the Trig 1 Out, or Trig 2 Out, connector to trigger on either the positive or negative
polarity.
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
Off
Selects no signal to be output to the Trig 1 Out, or Trig 2 Out, connector.
200
Input/Output, Output Config
:TRIGger|TRIGger1|TRIGger2[:SEQuence]:OUTPut HSWP | MEASuring | MAIN |
GATE | GTRigger | OEVen | SPOint | SSWeep | SSETtled | S1Marker |
S2Marker | S3Marker | S4Marker | OFF
:TRIGger|TRIGger1|TRIGger2[:SEQuence]:OUTPut?
TRIG:OUTP HSWP
TRIG2:OUTP GATE
The second Trigger output (Trig 2 Out) does not appear in all models; in models that do not support it,
the Trig 2 Out key is blanked, and sending the SCPI command for this output generates an error,
"Hardware missing; Not available for this model number" In models that do not support the Trigger
2 output, this error is returned if trying to set Trig 2 Out and a query of Trig 2 Out returns OFF.
Trigger 1: Sweeping (HSWP)
Trigger 2: Gate
This is unaffected by a Preset but is preset to the above values on a "Restore Input/Output Defaults"
or "Restore System Defaults->All"
Saved in instrument state
Prior to A.02.00
Input/Output, Output Config, Trig 1/2 Output
:TRIGger|TRIGger1|TRIGger2[:SEQuence]:OUTPut:POLarity POSitive |
NEGative
:TRIGger|TRIGger1|TRIGger2[:SEQuence]:OUTPut:POLarity?
TRIG1:OUTP:POL POS
This is unaffected by a Preset but is set to POSitive on a "Restore Input/Output Defaults" or "Restore
System Defaults->All"
Saved in instrument state
Prior to A.02.00
EMI Receiver Mode Reference