Mark All - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Meas Setup
Key Path
Remote Command
Example
Notes
Dependencies
Initial S/W Revision

Mark All

Marks all signals in the signal list.
Key Path
Remote Command
Example
Notes
Dependencies
Initial S/W Revision
Clear All
Clears all the marks from the signal list.
Key Path
Remote Command
Example
Notes
Dependencies
Initial S/W Revision
Delete Signals
This key opens the delete signals option menu.
444
Meas Setup, Signal List, Mark Signals
:CALCulate:FSCan:SLISt:MARK:CLEar:SIGNal <integer>
CALC:FSC:SLIS:MARK:CLE:SIGN 11 Clear mark from signal #11.
If the signal list contains no data, an error is generated and this function cannot be performed.
If the selected signal is not in the list, an error is generated and this function cannot be performed.
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.07.00
Meas Setup, Signal List, Mark Signals
:CALCulate:FSCan:SLISt:MARK:ALL
CALC:FSC:SLIS:MARK:ALL
If the signal list contains no data, an error is generated and this function cannot be performed.
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.07.00
Meas Setup, Signal List, Mark Signals
:CALCulate:FSCan:SLISt:MARK:CLEar:ALL
CALC:FSC:SLIS:MARK:CLE:ALL Clear mark from all signals.
If the signal list contains no data, an error is generated and this function cannot be performed.
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.07.00
EMI Receiver Mode Reference