Questionable Temperature Negative Transition - Keysight x-series User Reference Manual

3 Programming the Analyzer
STATus Subsystem
The register requires that the associated PTR or NTR filters be set before a condition register bit can set a
bit in the event register. The data in this register is latched until it is queried. Once queried, the register is
cleared
Mode
Remote Command
Example
Preset
Status Bits/OPC
dependencies
Initial S/W Revision

Questionable Temperature Negative Transition

This command determines which bits in the Questionable Temperature Condition register will set the
corresponding bit in the Questionable Temperature Event register when the condition register bit has a
negative transition (1 to 0). The variable <integer> is the sum of the decimal values of the bits that you want
to enable.
Mode
Remote Command
Example
Preset
Min
Max
Status Bits/OPC
dependencies
Initial S/W Revision
Questionable Temperature Positive Transition
This command determines which bits in the Questionable Temperature Condition register will set the
corresponding bit in the Questionable Temperature Event register when the condition register bit has a
positive transition (0 to 1). The variable <integer> is the sum of the decimal values of the bits that you want
to enable.
Mode
Remote Command
Example
138
All
:STATus:QUEStionable:TEMPerature[:EVENt]?
STAT:QUES:TEMP?
0
Sequential command
Prior to A.02.00
All
:STATus:QUEStionable:TEMPerature:NTRansition <integer>
:STATus:QUEStionable:TEMPerature:NTRansition?
STAT:QUES:TEMP:NTR 1 Reference Oscillator Oven not cold will be reported to the Temperature
Summary of the Status Questionable register.
0
0
32767
Sequential command
Prior to A.02.00
All
:STATus:QUEStionable:TEMPerature:PTRansition <integer>
:STATus:QUEStionable:TEMPerature:PTRansition?
STAT:QUES:TEMP:PTR 1 Reference Oscillator Oven became cold will be reported to the
EMI Receiver Mode Reference