If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
LTE TDD
Selects the LTE TDD mode for general purpose measurements of signals following the LTE TDD standard.
There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
LTE-Advanced FDD
As LTE-Advanced FDD and LTE modes are converged into one single application, the single softkey under
Mode menu is designed to select the coverged mode. The display mode of the LTE and LTE-Advanced
FDD are distinguished by the licenses.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Notes
Backwards
Compatibility SCPI
Initial S/W Revision
Modified at S/W Revision
EMI Receiver Mode Reference
Mode
INST:SEL LTE
INST:NSEL 102
Prior to A.02.00
Mode
INST:SEL LTETDD
INST:NSEL 105
A.03.00
Mode
INST:SEL LTEAFDD
INST:NSEL 107
When the N9080A/80B–1FP exists, the display mode name is LTE.
When the N9080A/80B–1FP and N9080B–2FP all exist, the display mode name is LTE FDD & LTE-A
FDD.
INST:SEL LTE
INST:NSEL 102
A.14.00
A.14.50
5 Mode Functions
Mode
239