Edit Limit - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Meas Setup
Preset
State Saved
Min
Max
Default Unit
Initial S/W Revision

Edit Limit

Opens the Table Editor for the selected limit line. We use the same table editor as Amplitude Correction;
see the Input/Output chapter of the Mode Common PD for a full description of the Table Editor.
Key Path
Initial S/W Revision
Navigate
Enables you to move through the table to edit the desired point
Key Path
Notes
Min
Max
Initial S/W Revision
Frequency
Enables you to edit the frequency of the current row.
Key Path
Notes
Min
Max
Initial S/W Revision
Amplitude
Enables you to edit the Amplitude of the current row.
490
Not affected by Mode Preset, set to 0 dB for all Limits by Restore Mode Defaults.
Saved in instrument state.
–40 dB
0 dB
dB
A.07.00
Meas Setup
A.07.00
Meas Setup, Limits, Edit
There is no value readback on the key
1
2000
A.02.00
Meas Setup, Limits, Edit
There is no value readback on the key
0
1 THz
A.02.00
EMI Receiver Mode Reference