Deselect All - Keysight x-series User Reference Manual

6 System Functions
System

Deselect All

Clears the marks from all applications in the selection list, except the Power On application. The Power On
application cannot be eliminated from the pre-load list.
Key Path
Initial S/W Revision
Move Up
The application list is the order that applications appear in the Mode Menu. This key enables you to shift
the selected application up in the list, thus moving the selected application earlier in the Mode Menu.
Key Path
Initial S/W Revision
Move Down
The application list is the order that applications appear in the Mode Menu. This key enables you to shift
the selected application down in the list, thus moving the selected application later in the Mode Menu.
Key Path
Initial S/W Revision
Select/Deselect
Toggles the currently highlighted application in the list.
Key Path
Initial S/W Revision
Save Changes and Exit
Applies the configuration of the applications list. The marked applications will be pre-loaded in memory the
next time the instrument application is started, and the order of the applications in the list will be the order
of the applications in the Mode Menu.
After saving your changes, the analyzer asks you if you would like it to restart so that your changes can
take effect (see dialog box, below). If you choose not to restart, the changes will not take affect until the
next time you shut down and restart the analyzer.
286
System, Power On, Configure Applications
A.02.00
System, Power On, Configure Applications
A.02.00
System, Power On, Configure Applications
A.02.00
System, Power On, Configure Applications
A.02.00
EMI Receiver Mode Reference