Meas Results - Keysight x-series User Reference Manual

Dwell Time,0.00410213333333333,0.000108066666666717,6.73333333333333E–06,6.73333333336191E–
06,6.73333333335395E–06,1.26666666667647E–06,0.001,0.001,0.001,0.001
Dwell Time Mode,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO
Step
Size,100,4499.5477841423,60000,60003.4287673581,60002.4743288383,500000,100000,100000,100000,100000
Step Size Mode,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO
Scan Points,1411,6635,4501,11667,16167,34001,2,2,2,2
Scan Points Mode,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO
Scan
Time,5.784008,0.716914266667,0.0303,0.078551066667,0.108851066667,0.043066666667,0.001,0.001,0.001,0.001
Scan Time Mode,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO,AUTO
Auto Step Size Rules,Points per RBW,Points per RBW,Points per RBW,Points per RBW,Points per RBW,Points per RBW,Points per
RBW,Points per RBW,Points per RBW,Points per RBW
Pts/RBW,2,2,2,2,2,2,2,2,2,2
Log %,10,10,10,10,10,10,10,10,10,10
Atten,10,10,10,10,10,10,10,10,10,10
Int Preamp,OFF,OFF,OFF,OFF,OFF,OFF,OFF,OFF,OFF,OFF
RF Input,Input1,Input1,Input1,Input1,Input1,Input1,Input1,Input1,Input1,Input1

Meas Results

Pressing this key selects Meas Result as the data type to be exported with a save request. The next step is
to select the Save As key in the Save Data menu. You are given the flexibility to choose what to display in
the report.
Key Path
Remote Command
Example
Notes
Initial S/W Revision
Trace
Enables you to customize the trace related information to be added into the report.
Key Path
Initial S/W Revision
EMI Receiver Mode Reference
Save, Data
:MMEMory:STORe:RESults <filename>
:MMEM:STOR:RES "C:\My Documents\EMI\data\report1.html"
exports the measurement result to the file report1.html
The default path is at "My Documents\EMI\data\FSCAN\Results\"
If the save is initiated via SCPI, and the file already exists, the file and the directory will be
overwritten.
Using the C: drive is strongly discouraged, since it runs the risk of being overwritten during an
instrument software upgrade.
Both single and double quotes are supported for any filename parameter over SCPI.
A.10.00
Save, Data, Meas Result
A.10.00
8 Frequency Scan Measurement
Save
557