Keysight x-series User Reference Manual page 607

Remote Command Results
Command
INITiate:SCHart
CONFigure?
CONFigure:SCHart
INITiate:SCHart
FETCh:SCHart [n]?
MEASure:SCHart [n]?
READ:SCHart [n]?
Key Path
Initial S/W Revision
EMI Receiver Mode Reference
N Results Returned
n/a n/a
n/a name of current measurement: " SCHart "
n/a n/a (selects Strip Chart measurement in Meas Preset state)
n/a n/a (selects Strip Chart measurement without affecting settings)
Not specified Return the following comma-separated scalar results:
or n=1 1. Current measurement result of Meter 1
2. Current measurement result of Meter 2
3. Current measurement result of Meter 3
Note : Return NaN (9.91E37) if the Meter is not available.
n=2 Return the following comma-separated scalar results:
1. Max measurement result of Meter 1
2. Max measurement result of Meter 2
3. Max measurement result of Meter 3
Note : Return NaN (9.91E37) if the Meter is not available.
n=3 This query returns Trace 1 data as a list of x,y pairs. The y-values are in the
n=4 Returns Trace 2 data as a series of x,y pairs
n=5 Returns Trace 3 data as a series of x,y pairs
Meas
A.07.00
current Y-Axis Unit of the analyzer. The x-axis values are the values of
the trace, in the x-axis scale units of the trace (Hz for frequency domain
traces, seconds for time domain traces).
9 Strip Chart Measurement
607