List Scpi Commands (Remote Command Only) - Keysight x-series User Reference Manual

6 System Functions
System
The front panel 'Local' key (Cancel/Esc) has no effect if Klock is ON.
Mode
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision

List SCPI Commands (Remote Command Only)

Outputs a list of the valid SCPI commands for the currently selected Mode.
Remote Command
Example
Notes
Initial S/W Revision
SCPI Version Query (Remote Command Only)
Returns the SCPI version number with which the instrument complies. The SCPI industry standard
changes regularly. This command indicates the version used when the instrument SCPI commands were
defined.
Remote Command
Example
Initial S/W Revision
Date (Remote Command Only)
The recommended access to the Date, Time, and Time zone of the instrument is through the Windows
native control (Control Panel or accessing the Task Bar). You may also access this information remotely, as
shown in this command and Time (below).
Sets or queries the date in the instrument.
Mode
Remote Command
280
All
:SYSTem:KLOCk OFF|ON|0|1
:SYSTem:KLOCk?
:SYST:KLOC ON
Keyboard lock remains in effect until turned-off or the instrument is power-cycled
Initialized to OFF at startup, unaffected by Preset
No
Prior to A.02.00
:SYSTem:HELP:HEADers?
:SYST:HELP:HEAD?
The output is an IEEE Block format with each command separated with the New-Line character (hex
0x0A)
Prior to A.02.00
:SYSTem:VERSion?
:SYST:VERS?
Prior to A.02.00
All
:SYSTem:DATE "<year>,<month>,<day>"
:SYSTem:DATE?
EMI Receiver Mode Reference