Keysight x-series User Reference Manual page 756

10 Monitor Spectrum Measurement
FREQ Channel
values are undefined until the next scan/final measurement.
Key Path
Remote Command
Example
Notes
Couplings
Initial S/W Revision
756
Freq
:CALCulate:MONitor:SLISt:APPend:METer
CALC:MON:SLIS:APP:MET
If there is no free space in the signal list, you will be prompted by a message that asks whether to
continue or not: WARNING! There is not enough free space in Signal List. Would you like to clear the
Signal list before adding signals? Press ENTER to continue or ESC to Cancel.
If the user sends the SCPI command when there is no free space in the signal list, the application will
just clear the signal list. Pop up is only for key press.
The appended signal will be the selected signal after Metersà List is performed.
A.13.00
EMI Receiver Mode Reference