Restore Mode Defaults (All Modes) - Keysight x-series User Reference Manual

Miscellaneous Setting
SCPI Telnet
SCPI Socket
SICL Server
Softkey Language
System Annotation
Display Theme
System IDN Response
Display Intensity
Display Backlight
GPIB Address
Confirmation is required to restore the factory default values. The confirmation dialog is:
Key Path
Example
Initial S/W Revision

Restore Mode Defaults (All Modes)

This selection resets all of the modes in the instrument back to their default state just as a Restore Mode
Defaults does and it switches the instrument to the power-on mode and causes the default measurement
for the power-on mode to be active. This level of Restore System Defaults does not affect any system
settings, but it does affect the state of all modes and does cause a mode switch unless the instrument was
already in the power-on mode.
Confirmation is required to restore the factory default values. The confirmation dialog is:
EMI Receiver Mode Reference
Default Value
ON
ON
ON
English
ON
TDColor
Factory result of *IDN?
100
ON
18
System, Restore System Defaults
:SYST:DEF MISC
Prior to A.02.00
6 System Functions
System
343