Control Panel - Keysight x-series User Reference Manual

Control Panel...

Opens the Windows Control Panel. The Control Panel is used to configure certain elements of Windows
that are not configured through the hardkey/softkey System menus.
This feature is not available if option SF1 is installed.
The Control Panel is a separate Windows application, so to return to the analyzer once you are in the
Control Panel, you may either:
Exit the Control Panel by clicking on the red X in the upper right hand corner, with a mouse
Or use Alt-Tab: press and hold the Alt
logo is showing in the window in the center of the screen, as above, then release the Alt key.
Key Path
Notes
Initial S/W Revision
EMI Receiver Mode Reference
key and press and release the Tab key until the Analyzer
System
No remote command for this key.
Prior to A.02.00
6 System Functions
System
345