Peak Criteria Only - Keysight x-series User Reference Manual

Peak Criteria Only

When this key is selected, performing search or issuing the equivalent remote command will add peaks
into the signal list, subject to the peak-criteria qualifications defined in
Key Path
Example
Readback Text
Initial S/W Revision
Peak Criteria and Limits
When this key is selected, performing a search or issuing the equivalent remote command will add peaks
that meet the limits and margin that is turned on into the signal list. The search is also subject to the peak-
criteria qualifications defined in
Key Path
Example
Readback Text
Initial S/W Revision
Subranges and Limits
When this key is selected, performing a search or issuing the equivalent remote command will divide the
whole frequency range into equal width subranges. The peak will be determined for each subranges and
peaks that exceed the limits and margin that is turned on will be added into the signal list.
Key Path
Example
Readback Text
Initial S/W Revision
# of Peaks
When turned on, determines how many peaks to find during Search when Search Criteria is set to "Peak
Criteria Only" or "Peak Criteria and Limits".
Key Path
Remote Command
EMI Receiver Mode Reference
Meas Setup, Limits, Search Criteria
FSC:SEAR:MODE PONL
Peak Criteria Only
A.07.00
section"Peak Criteria" on page
Meas Setup, Limits, Search Criteria
FSC:SEAR:MODE PLIM
Pk Crit and Limits
A.07.00
Meas Setup, Limits, Search Criteria
FSC:SEAR:MODE SLIM
Subranges & Limits
A.11.00
Meas Setup, Limits, Search Criteria
[:SENSe]:FSCan:SEARch:PEAK:COUNt <integer>
[:SENSe]:FSCan:SEARch:PEAK:COUNt?
[:SENSe]:FSCan:SEARch:PEAK:COUNt:STATe ON|OFF|1|0
[:SENSe]:FSCan:SEARch:PEAK:COUNt:STATe?
8 Frequency Scan Measurement
section"Peak Criteria" on page 516
516.
Meas Setup
495