9 Strip Chart Measurement
AMPTD Y Scale
Example
Dependencies
Readback
Initial S/W Revision
dBpΤ
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBpT. This is an antenna unit, and this
key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of the
other Antenna Units are grayed out.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
dBG
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBG. This is an antenna unit, and this
key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of the
other Antenna Units are grayed out.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
None
This is selected if no Antenna Unit is currently on, however you cannot actually set this value, since it is
always grayed out. The key is included simply to provide an indication on the Readback line of the Antenna
Unit key when there is no Antenna Unit selected.
Key Path
Readback
Initial S/W Revision
618
UNIT:POW DBUAM
Grayed out if no Amplitude Correction with an Antenna Unit is on.
dBµA
A.11.00
AMPTD Y Scale, Y Axis Unit, Antenna Unit
UNIT:POW DBPT
Grayed out if no Amplitude Correction with an Antenna Unit is on.
dBpT
A.02.00
AMPTD Y Scale, Y Axis Unit, Antenna Unit
UNIT:POW DBG
Grayed out if no Amplitude Correction with an Antenna Unit is on.
dBG
A.02.00
AMPTD Y Scale, Y Axis Unit, Antenna Unit
"None"
A.11.00
EMI Receiver Mode Reference